Showing posts with label kustomkulttuuri. Show all posts
Showing posts with label kustomkulttuuri. Show all posts

Tuesday, 21 January 2020

Kustomkulttuurin uuskäsityöläisyys ja perinteinen käsityö, onko eroa? - The neo-handcrafts of kustom kulture vs. traditional handcrafts, is there a difference?


Motorcycle by Flying Choppers, traditional handicrafts or kustom kulture? Methods of built are more or less traditional, but the design and display definately kustom kulture.

Kustomkulttuurin esinevalikoima voidaan jakaa karkeasti kahteen suurempaan osa-alueeseen. Perinteisesti kustomointi kohdistuu autoihin ja moottoripyöriin. Niiden piirissä on toki tyylien vaihteluja mutta tyypillistä rakentajille on jonkinlainen kustomoinnin perinteen ymmärtämisen ja kunnioittamisenkin taito. Toisen visuaalisesti painottuneen ja laajan kokonaisuuden muodostavat erilaiset käyttöesineiden kustomoijat sekä suoranaiset taiteellisista lähtökohdista starttaavat maalarit ja erilaisten hahmojen veistäjät. Perinteet ovat tärkeässä osassa heilläkin, jotta työt osuisivat kustomkulttuurin kuluttajaryhmään. Perinne ei kuitenkaan ole ihan samanlaista kuin totutussa käsityössä, kustomkulttuurin visuaalisuuden perinne on nuorta ja se on jatkuvassa muutoksessa.


Pohdiskelin käsityön ydintä syksyllä 2019 pidetyssä seminaarissa, jossa käsiteltiin Turun Yliopiston Kansatieteen laitoksen perustajan, Ilmar Talven vaikutusta kansatieteessä. Seminaarissa käsiteltiin mm. nykyaikaisen käsityön olemusta ja siinä yhteydessä myös omalta näkökannaltani kustomkulttuurin uuskäsityöläisyyttä.

A customized tool by Doug Dorr. A tool has got a new meaning and message.

 Kustomkulttuurin käsityöesine liittää sen osaksi kustomkulttuurin ”heimon” merkkejä. Kustomkulttuurissa käsityötuotteeseen liittyy vahvasti visuaalisuus, mutta sillä on myös jossain määrin käytännön arvoja. Mikä sitten erottaa ihan tarkkaan ottaen kustomkulttuurin käsityöesineen perinteisestä käsityöstä? Onhan kustomkulttuurinäyttelyssä mukana käsityöläisiä, jotka tekevät esimerkiksi kitaroita tai laukkuja, tai rakentavat autoja ja moottoripyöriä, pääsääntöisesti hyvin perinteisin menetelmin. Voidaan kysyä, ovatko nuo tuotokset kustomkulttuuria. Minkä uuskäsityöläisyyden lisän he tuovat perinteiseen käsityöläisyyteen?

Custom built electric guitar by Katar Kustom Kuitars, even the name is customized. Handicrafts at its best, but displayed again in kustom kulture show, gives kustom kulture wibes. Not to mention the wild colors and beautiful details.
Eroja ei synny niinkään valmistamisen tekniikoissa vaan twisti syntyy käsityöesineen muuttuneesta käyttötarkoituksesta, ilmeestä sekä käyttöympäristöstä. Jopa paikka, jossa esineet esitellään antaa sille kustomkulttuurilisää ja lopulta vaikuttaa myös tekijän oma asenne, joka on kallellaan kustomkulttuurin suuntaan. Kun kustomkulttuurikäsityöläinen esittelee töitään ”normaaleilla” messuilla, edustaa hän luultavasti normaalia käsityötä, joskin ehkä normaalista poikkeavaa tyyliä edustavana. Mitähittoa…!

Tarkoituksenmukainen tai kauneutta viestivä esine on perinteisen käsityön tavoite, kustomkulttuurin uuskäsityö taas haluaa usein hätkähdyttää tai olla erilainen


Old tools are often honed to perfection for their use. Technical museum Helsinki
Perinteisen käsityön esine on usein tarkoituksenmukainen, sillä se on usein käyttöön kehitetty, ehkäpä vuosikymmenien tai vuosisatojen aikana. Esimerkiksi käy hyvin kirves, puukko ja erilaiset asusteet ja vaatteet. Toisaalta kohde voi olla myös jonkinlainen muistoesine tai se voi kantaa mukanaan viestiä, kuten kirkolliset esineet. Voihan se toki olla myös tekijänsä puhdas taidonnäyte, niin kuin erilaiset korut ovat. Tekijät ovat usein pitkän linjan käyneitä, oppipojasta mestariksi ylenneitä taitajia, joskin myös perinteinen maatalous on vaatinut monenlaisia käsityön taitoja ilman sen kummempaa koulutusta.  Kehityskaarensa aikana esineen valmistusmenetelmät ovat hioutuneet ja materiaalit ovat valikoituneet tehtäväänsä parhaimmin sopiviksi. Jossain vaiheessa käsin tehty esine on ehkä korvattu tehdastekoisella, tai sen käyttötarkoitus on jäänyt toisarvoiseksi. Siitä on tullut koriste-esine tai rituaaliesine.


 
Tiki mugs, a kustom item itself has been re-customized by El Balenko.

Kustomkulttuurin (uus)käsityöläinen

Kustomkulttuurin käsityöläinen voi olla toki alun perinkin koulutettu käsityöläiseksi, mutta usein hän on ammatinvaihtaja, joka on parhaimmillaan tehnyt harrastuksesta elämänsä pääasian. Useimmat tuntemani kustomkulttuurikäsityöläiset tekevät työtään päivätyön ohessa, itsensä ilmaiseminen tuo arkeen selkeästi lisäarvoa. Lähtökohta on siis harrastus ja ilmaisunhalu, josta saattaa kasvaa uusi ammatti. Kustomkulttuurin yhteisöllisyys tukee harrastuksen leviämistä, ihmiset tapaavat muita samanhenkisiä ja saavat tukea sekä positiivisia haasteita vertailemalla tekemisiään muiden tuotoksiin. Tämänkaltainen kehitys on jälkimodernille ajallemme tyypillistä, emme tarvitse enää pitkää perinteen jatkumoa, jotta pääsisimme mukaan käsityön taitajaksi. Riittää että olemme kiinnostuneita jostain kustomkulttuurin alueesta ja voimme panostaa siihen kaiken tarmomme. Perinteen korvaa yhteisön sopimat rajat ja niihin soveltuvat omat tuotokset.

Crazy Tiki Art is a frequent visitor on shows and has a well organized and personal style to show.

Kustomkulttuurin käsityöläinen kustomoi arkea


Kustomkulttuurin käsityöesine liittää sen osaksi kustomkulttuurin ”heimon” merkkejä. Kustomkulttuurissa käsityötuotteeseen liittyy vahvasti visuaalisuus, mutta sillä on myös jossain määrin käytännön arvoja. Kustomkulttuurin uuskäsityöläinen ei pääsääntöisesti tee työkaluja tai esineitä ensisijaisesti käyttöön, vaan useimmiten koristeeksi, jolla ilmaistaan esimerkiksi omaan heimoon kuulumista, tai taitavan työn arvostamista. Esineiden valmistaminen on usein kierrätystä ja muokkaamista, eli selvällä suomenkielellä kustomointia. Ne saavat uuden erilaisen elämän uudelleenmuotoiltuna tai maalattuna niin, että niissä on jotain lowbrow tai underground-henkistä viestiä, tai puhtaasti kustomkulttuurin symboleja, kuten lentäviä silmämunia, liekkejä tai vaikkapa pinstripe-kuvioita.

Toisaalta esine voi olla uusikin ja silti olla osa kustomkulttuuria. Käsityönä tehtyjä laukkuja voidaan selkeästi liittää myös kustomkulttuurin osaksi, kun ne ovat valmistettu vaikkapa vanhojen jenkkiautojen sisustuksia muistuttaviksi, niin väreiltään kuin materiaaleiltaankin. Eli ne viittaavat johonkin arjessa epätavanomaiseen, mutta kustomkulttuurin sisäistäneelle henkilölle tuttuun asiaan.
A handicrafts factory made bag by Trophy Queen has look of a kustom interior of an automobile.

Kustomkulttuurin käsityöläinen voi tehdä esineitä myös pienimuotoisena sarjatyönä, jolloin hänen asenteessaan on jo liiketoiminnan piirteitä. Tällöin tekijälle on usein muodostunut jonkinlainen tuttu tyyli, josta hänen työnsä tunnistetaan. Tämänkaltainen ”kaupallinen” lähestyminen kustomkulttuuriin on selvästi lisääntymässä, erityisesti kun tekijä haluaa tienata työllään muutakin kuin taskurahoja.


Kustomkulttuurin esine- ja kuvamaailma perustuukin ideoiden kierrätykseen ja 
uudelleenjärjestelemiseen. Siihen liittyy myös asenne, jolle tyypillistä ovat sarjakuvamainen tai lowbrow-henkinen karheus ja totutun normaalin olemuksen vääntely (with a twist). Myöskään kitsch ei ole vierasta kustomkulttuurille, hyvän maun kyseenalaistaminen ja katu-uskottavuus kulkevat käsi kädessä.
 
Your own house elf can have a totally different look in kustom kulture environment.


Edelliseen perustuen voidaan väittää, että kustomkulttuurin uuskäsityö tuo perinteiseen käsityöhön verrattuna lähinnä tuotteen olemukseen ja sen välittämään viestiin liittyviä eroavaisuuksia. Tämä viesti onkin kustomkulttuurin eräs tärkeimmistä sisällöistä: Emme tyydy keskivertoon, elämässä on oltava tyyliä, siivu vintagea ja sopivasti särmää!

Is the neo-handicrafts of kustom kulture different from traditional crafts?

Customized bicycle by Juha Markkula, owner Lasse Vänttinen.


The array of kustom kulture items can be roughly divided into two major areas. The basics of kustomization objects are cars and motorcycles. They have a many style variations, and builders usually have some sort understanding and respect of the customization tradition. Another visually-focused and extensive entity is made up of customized everyday items or tools, as well as painters and sculptors having an artistic intentions to customize their objects. There the traditions are also an important part, so that the work will fit of the context of the kustom kulture. However, the tradition is not quite the same as in traditional handicrafts, the kulture is young and it is constantly changing.

I discussed the essence of handicraft at a seminar held in the autumn of 2019 in the University of Turku. The seminar of Ilmar Talve, founder of the Department of European Ethnology at the university dealt with issues such as: the essence of modern handicraft and, from my own point of view, the neo-handicraft of the kustom kulture.

 The customized object embeds it as part of a kustom kulture “tribe”. In kustom kulture, a handicraft product is strongly associated with visual elements, but it may have some practical values as well. So what exactly distinguishes a kustom kulture handicraft from traditional handicraft? After all, a kustom kulture exhibition involves artisans who can create guitars or bags, or build cars and motorcycles, usually in very traditional ways. One may ask whether those outputs are a kustom kulture. What kind of new craftsmanship do they bring to traditional crafts?

Wizman displays his totally twisted artwork

There are no differences in the manufacturing techniques, but the kustom kulture twist comes from different view towards the craft, from the style of the final output and the environment in which object is used. Even the place where the objects are presented gives it a  sense kustom kulture. Not to mention how the handcrafters own attitude leaning towards the kustom kulture has a big significance. When a kustom craftsman presents his work at a "normal" fair, he is probably considered a normal handcrafter with just a different look in his/hers objects.

In traditional craftsmanship the usefulness and beauty are the main goals, as in kustom kulture neo-handicafts, the artisan wants to startle or show that he is different from the mainstream.

Traditional handicrafted item is usually designed to be practical or beautiful, while kustom kulture object prefers to have shock value or at least differ from the normal

Art or kustom kulture cartoon? The unique sculptures of  BR1 Monster are so finely detailed and unique that they can be described as art.

A traditional handicraft item is often practical as it is developed for use, perfected over decades or even centuries of use, take for example an ax, knife or various woven garments. On the other hand, the object may also be some kind of memorabilia or carry a message, such as church objects. Of course, it can also show the pure skill of its maker, like jewelry does. The creators are often experienced, begun as an apprentice and learned to be a master of his craft, take farmers, practice has taught them a wide range of craft skills without any formal training. The methods of manufacturing an object have been refined and the materials have been selected to best suit their purpose. At some point, a hand-made object may have been replaced by a factory-made one, or its purpose may have been neglected. It has become a decorative or ritual object.

Neo-craftsman in kustom kulture

A craftsman in a kustom kulture may be initially trained as a craftsman, but he is often a professional changeover who has realized his dream by making his hobby as the main thing in life. Most of the kustom kulture artisans I know do their work alongside the day job. So the starting point is a hobby and a desire for expression that can grow into a new profession. The community of kustom kulture supports the spread of the craft, people meet like-minded people and get support and positive challenges by comparing with others what they have produced. This type of development is typical of our post-modern era, and we no longer need a long tradition to become a craftsman. It is enough that we are interested in some area of ​​kustom kulture and that we can invest all our energies in it. The tradition is replaced by the limits agreed by the community and its own output.

Re-use of old too with some grotesque detailing from Switzerland.

Kustom kulture craftsman kustomizes our everyday life

A kustom kulture object becomes a part of a kustom kulture “tribe”. A handicraft piece is strongly associated with visual look, but it may also have some practical values. As a rule, a neo-craftsman does not create objects for everyday use, but most often something that expresses, for example, belonging to one's own tribe or appreciation of worksmanship. Objects are often made of recycled items which are customized. Customization is the key word in kustom kulture! The items get a whole new life trough mechanical customizing, or repainting with some lowbrow or underground “message”, or purely kustom kulture symbols like flying eyeballs, flames or pinstripe patterns.

Customized shoes and handbags for miss Muy.

On the other hand, the object may be new and still be part of the kustom kulture. Handmade bags can also be clearly incorporated into a kustom kulture when they are made to resemble, for example, car interiors, both in color and in materials. That is, they refer to something un-common for everyday life, but familiar to someone who has assimilated kustom kulture.

A craftsman in a kustom kulture can also make objects in small-scale serial production, his attitude includes already business-like features. As a result, the creator has often developed a familiar style that identifies his work from the others. This kind of "commercial" approach to kustom kulture is clearly on the rise, especially when the artist or artisan wants to earn more than pocket money.

Classic madonna -statuette has an alternative look, by Dmtr.

The object and image world of kustom kulture is therefore based on recycling and rearranging of ideas. It also has an attitude characterized by cartoonish or lowbrow-like roughness and a twist of everyday life. Kitsch is no stranger to kustom kulture either, questioning the good taste and street creditability go hand in hand.

Based on the foregoing, it can be argued that kustom kulture’s neo-handicrafts do not differ that much from the traditional handcrafts, but bring differences in the message the objects and its holder convoy. Showing a message with quality and difference seems like being the most important thing in a kustom kulture: We are not content with the average, there must be style, a slice of vintage and the a proper edge in life!

Saturday, 7 December 2019

Kustomkulttuurin kansainvälisyyttä hakemassa - Searching the international Kustom Kulture - Yokohama Hot Rod Custom Show 2019



(Scroll down for the english text)

Makoto, Fortune Cats, cast resin, paint.


Viimeisen parin viikon katkos blogikirjoitukseeni on johtunut Yokohaman näyttelystä, joka pidettiin viime viikonloppuna. Siihen valmistautuminen vaati melkoisen työmäärän, eli useita maalattuja esineitä ja tauluja, jotta paikalle ylipäätään kehtasi saapua. Yokohaman näyttely on eräs merkittävimmistä kansainvälisen kustomkulttuurikentän tapahtumista, koskapa sinne saapuu runsaasti osallistujia myös Japanin ulkopuolelta.
Together with the Finnish crew, Mr. Shige Suganuma, the organizer in white coat, left to him John D'Agostino. Back row Janne Ahonen, Janne Kutja, in a red coat Esa Mikkonen, Pekka, front row from left Jussi Alasalmi, Marco Planting, Anne Mikkonen and Eero Kumanto
Olen käynyt Yokohamassa ensimmäisen kerran vuonna 2004, sen jälkeen kansainvälistyminen on ollut hurjaa. Perinteisesti hot rod -maailmassa japanilaiset harrastajat katsovat lähinnä itään, eli Eteläiseen Kaliforniaan. Eurooppalaisten sekä muualta Kaukoidästä tulevien harrastajien toimesta näyttelyyn on tuotu sekä konkreettisia ajoneuvoja, että harrastajien kautta ehkäpä uutta ajatteluakin. Taiteilijaosasto oli perinteisen laaja, osallistujia oli monista Euroopan maista, USA:sta, Malesiasta, Thaimaasta ja jopa Kiinan suunnalta. Pinstripe-maalarit oli koottu omaksi osastokseen ja Suomesta paikalla olivat lisäkseni Jussi Alasalmi, Marco  Planting sekä pienoismallirakennuksen superstara Eero Kumanto, joka saapui paikalle Bankokin hot rod-näyttelystä missä hän oli kutsuttuna vieraana. Tunnettu autonpiirtäjä Janne Kutja majaili muiden kansainvälisten artistien kanssa omalla osastollaan. Euroopasta näyttelyssä pinstripe-taiteilijoita oli myös Italiasta, Virosta ja Sveitsistä.


Käsityöläishaastatteluja

Discussing with Christof Kaspar, the Thrashboy

Discussing with Italian artist/artisane Luigi Morgese

Dan Collins was one of the participant for our conversations of Kustom Kulture, here he is with Marco Platu Planting (right) who organizes the well known and respected Kustom Kulture Show in Helsinki, Finland.

Makoto was one of the participants of the interviews, here with one of the cats which was not yet sold.

Tein paikan päällä myös haastatteluja alan taiteilijoiden kanssa. Eteläisestä Italiasta saapuva Luigi Morgese maalaa ja valmistaa erittäin taitavasti esineitä, joille tyypillistä on kuluneisuus ja tarina. Thrashboy -nimellä toimiva Christof Kaspar tulee Sveitsistä ja hänelle tyypillisiä ovat erilaiset värikkäät maalatut veistokset. Japanilainen Makoto Kobayashi on tunnettu kustom-maalari jonka japanilaisteemaiset patsaat ja maalaukset ovat maailman huippua. Yhdysvaltojen Kaliforniasta saapui Dan Collins, joka on monitaitoinen maalari, tatuoija ja peltiä muokkaava kustomrakentaja. Hän on ollut mukana Kustomkulttuurin alkuhämäristä ja erityisesti alueella, josta kulttuuri on saanut alkunsa.

Kävimme mielenkiitoisia keskusteluja kustomkulttuurin piirteistä, historiasta ja kustomkulttuurin uuskäsityöläisen tai taiteilijan olemuksesta. Yleinen käsitys oli, että kustomkulttuurin rajaaminen johonkin tiettyyn ikäluokkaan, aikakauteen tai maantieteelliseen alueeseen on vaikeaa. Yhteinen tekijä tuntui olevan kuitenkin, että autot ja moottoripyörät ovat jonkinlainen vauhtia antava sisältö, vaikka itse harrastajalla ei sellaista olisikaan. Sitä kautta kustomoinnin perinteinen alue, Kalifornia, nousee tietysti tärkeään asemaan, koska ilman tuota yli seitsemänkymmenen vuoden hot rod – ja kustomointihistoriaa itse kustomkulttuuriakaan ei olisi. Autojen malli tai ikä ei eurooppalaisten maalareiden mukaan ole olennaista, vaan siihen liittyvä asenne ja oman työn osuus. Eteläisen Euroopan skene on moottoripyöräpainotteinen ja usein harrastukseen liittyy vahva tarve korostaa omaa egoa, usein isolla rahalla ostetulla moottoripyörällä. Tällöin kustomkulttuuriin kuuluva käsityöläisyys ja itse tekeminen ja omaperäisyys korostuvat.

Kustomkulttuurin töissä on oltava mukana tekijän sydän


Erilaiset teokset ja käsityön tuotteet voivat olla joko taidetta tai käsityötä, kaikkein tärkein elementti on kuitenkin se, että tekijällä on oma sydän mukana tekemisessä. Se erottaa rutiininomaisen vanhan toistamisen oivaltavasta omasta ajattelusta. Ovatko työt sitten taidetta vai eivät, on tulkintakysymys, johon vaikuttaa mm. katsojan suhde työhön. Eräs ajatus oli, että jos työ on tehty sellaisella tavalla, että tekotapa ei suoranaisesti heti avaudu katsojalle, ollaan taiteen äärellä. Toinen ajatus oli, että esimerkiksi pinstripe-kuvio, joka maalataan vaikkapa autoon, on lisäys olemassaolevaan kohteeseen ja sellaisena se korostaa itse kohdetta, mutta ei ole varsinainen taideteos. Tästä voidaan tietysti johtaa ajatus, että pinstripe-teoksesta tulee taidetta vasta kun se on maalattu omaksi kuvaksi vaikkapa kankaalle ja nostettu seinälle. Oma käsitykseni onkin, että ajoneuvoon maalatun pinstripe-kuvion tehtävänä on tukea tai korostaa ajoneuvon tyyliä, ei kilpailla sen kanssa näyttävyydestä. Oma käsitykseni on, että uuskäsityö voi muuttua taiteeksi siinä vaiheessa, kun työssä on omaperäistä tulkintaa ja sen tekemisen laatu on riittävän korkeaa. Mutta loppujen lopuksi tulkinnan tekevät kuitenkin katsojat.
Restrained use of color and appropriately painted stripes and flames adds a lot for a simple color scheme
Mielenkiintoinen aihe oli myös suhde omassa työssä tapahtuviin virheisiin, saako niitä tapahtua ja ovatko ne korjattavissa. Tässäkin aika lailla yhteinen käsitys oli, että virheet kuuluvat työn tekemiseen ja ilman niitä ei tapahdu kehitystä, itse asiassa virheistä oppii ehkäpä kaikkein eniten! Mutta on toki paikkoja, joissa virheitä ei vaan saa tapahtua, kuten tatuointi… Virheiden havaitseminen tosin vaatii hiukan etäisyyttä työhön. Eräs haastateltava totesi, että pitkään saman työn ääressä puuhatessa sille tulee sokeaksi ja on tärkeää pitää pieniä taukoja, tai jopa ottaa valokuvia töistä ja tarkastella niitä kuvien välityksellä. Valokuva on armoton, se paljastaa asioita, joihin omat aivot eivät enää pysty!

Wildman, Hiro Ishii was celebrating his 30:th pinstriping anniversary year, working as always!

Yokohamassa on merkillepantavaa korkea laatu, joka koskee niin ajoneuvoja, taidetta tai myyntitavaraa. Taiteilijat ovat joutuneet maksamaan paikastaan, mikä tietysti karsii aloittelijat pois. Tänä vuonna on japanilaisen pinstripe-veteraanin Hiro Ishiin eli Wildmanin 30-vuotistaiteilijajuhla, sen kunniaksi hänellä oli esillä mittava osasto pinstripe-töitä. Wildman on hakenut oppinsa Ed Rothilta USA:sta 1980-luvulla ja hän kantaa Rothin perintöä omassa maalaustyylissään. Hän on myös näyttelyjärjestäjä Mooneyesin palkkalistoilla ja vastaa Mooneyesin t-paidoista ja monesta muusta graafisesta elementistä. Näyttikin siltä, että Wildman ei keskeytä työn tekoa missään vaiheessa! Myös Makoto ilmoitti sivulauseessa, että hänellä on myös 30 vuotta maalausta takanaan tänä vuonna. Makoto on kehittänyt pinstripe-maalausta enemmän japanilaiseen tyyliin kuin Wildman.

Kilpailu on kovaa


Näyttelyssä ei voi välttyä kilpailutilanteelta, jokainen käsityöläinen on paikalla myymässä tuotteitaan. Niinpä tärkeätä on löytää jonkinlainen yhteinen linja omille tuotteille, jotta katsojat saavat kiinni teemasta, jota ollaan esittelemässä. Jopa teosten esittelypaikalla on merkitystä, sillä ahtailla käytävillä katsojat kulkevat usein katse suunnattuna kohti pöytiä, silloin liian korkealle sijoitetut esineet saattavat jäädä huomaamatta. Suosikkitähden asemaa ei saa tuosta vain, Mooneyesin johtaja Shige Shuganuma valaisi, että japanilaisille markkinoille pääsy vaatii paljon esilläoloa ja toistoja. Eräs tällainen tähti on Rockin' Jellybean, taiteilija, jonka poikkeuksellisen taitavasti piirretyt naishahmot ja julisteet ovat niin persoonallisia, että ne tunnistaa välittömästi.Rockin' Jellybean esiintyy aina painimaskissa, mikä lisää hahmon eksoottisuutta. Nimikirjoituksia varten on syytä asettua jonoon hyvissä ajoin, sillä nimikirjoituksia jaetaan vain tarkkaan määriteltyinä aikoina!

Japanilaiset tuntuvat olevan kovia keräilijöitä, kun ovet avautuivat klo 8.00, alkoi villi ryntäys kohti Vans-kenkäosastoa. Järjestäjä on valmistuttanut omalla logollaan ja mallillaan tossut, joita sai ainoastaan näyttelyssä. Osaston eteen syntyi yli satametrinen jono, joka kiemurteli ympäri näyttelyaluetta, kaikki halusivat 120 € maksavat tossut itselleen. Sama toistui Mooneyesin omalla osastolla, missä oli tapahtumaa varten tehtyjä muistoesineitä ja paitoja. Makoto puolestaan valmistaa joka vuosi pienen sarjan Fortune Cat -kissapatsaita, jotka hän on maalannut lähes yli-inhimillisen taitavasti. Tänä vuonna näitä parikymmentä senttiä korkeita patsaita oli yhdeksän kappaletta ja ensimmäiset keräilijät olivat saapuneet näyttelyhallin oven taakse jo edellisenä iltana yhdeksän paikkeilla. He saivat jonotusnumeron, jonka kanssa he pääsivät sitten valitsemaan omansa. Noin 800:n euron patsaat myytiin kymmenessä minuutissa loppuun!

The long quey for the Mooneyes Vans was winding between the stands for over 100 meters!


Kustomkulttuuri on moniääninen, värikäs ja joskus vaikeasti määriteltävä kokonaisuus. Yokohaman näyttely on tapahtuma, jonka kuvaaminen ilman adjektiiveja on mahdotonta. Siellä koettavat kustomkulttuurin väristykset on aistittava kaikilla aisteilla ja osa kokemuksesta avautuu vasta viiveellä. Erittäin suuri tekijä on kansainvälinen yhteisö, jonka jäsenet jakavat monesti samat ajatukset, tulivatpa ihmiset etelästä, pohjoisesta, idästä tai lännestä!

----------------

On the trail of custom culture in Japan, Yokohama Hot Rod Custom Show 2019





The interruption of my blog post for the last couple of weeks is due to the Yokohama exhibition held last weekend. It took quite a bit of work to prepare for it, that is to say, several painted objects and paintings to make had to be finished. The Yokohama Exhibition is one of the most significant events in the international Kustom Kulture field, because of the large number of participants from outside Japan.

I've been to Yokohama for the first time in 2004, since then has the internationalization been furious. Traditionally, in the hot rod world, Japanese enthusiasts look mainly to the east, southern California. Europeans and enthusiasts from across the Far East have bring vehicles to the exhibition, and perhaps even new ideas. The artist section was traditionally extensive, with participants from many European countries, the USA, Malaysia, Thailand and even China. The Pinstripers had been assembled into their own section and from Finland I was accompanied by Jussi Alasalmi, Marco Planting and model building superstar Eero Kumanto who arrived at the Bangkok rod hot rod exhibition where he was as an invited guest. Renowned custom car designer-artist Janne Kutja stayed with other international artists in his stand. From Europe, there were also pinstripe artists from Italy, Estonia and Switzerland.

Model builder and pinstriper Eero Kumanto took a elderly gentleman's pose

Thrashboy's monster daruma's

Janne Kutja was was showing his beautiful custom automotive t-shirts

Discussions with the international craftsmen


I also did interviews with artists in the field. Coming from southern Italy, Luigi Morgese makes very skilfully painted objects with a traces of history in the form of beautiful patina and latin flavor. Christof Kaspar, aka Trashboy, comes from Switzerland and his work is characterized by a variety of colorful painted monster sculptures amongst other. Japanese Makoto Kobayashi is a well-known kustom painter whose Japanese-themed statues and paintings are among the best in the world. Dan Collins, a multi-talented low brow painter, tattoo artist and sheetmetal crafter, came from California, USA. He has been involved in the early twilight of Kustom Kulture and especially in the area where the culture originated.


We had interesting discussions about the features of kustom kulture, its history and the nature of the neo craftsmanship or artistry in kustom kulture. The general perception was that it was difficult to limit kustom kulture to a particular age group, era or geographic area. The common factor, however, seemed to be that cars and motorcycles are some kind of impetus, even if the enthusiast himself does not own one. Through this, the traditional area of ​​customization, California, will of course play an important role,  with its seventy years of hot rod and customization history, there would be no kustom kulture itself. According to European painters, the model or the age of the vehicle is not relevant, but the attitude and the amount of one's own work is. The scene in southern Europe is motorcycle-oriented and often involves a strong need to emphasize one's ego, often with a motorcycle bought for big money. In opposite to this,  the craftsmanship of the kustom kulture, the building process and originality are emphasized.

Your mistakes teaches you


Kustom kulture artists pieces can be either art or handicraft, but the most important element is that the artist has his or her own heart and soul put in to it! It differentiates routine repetition from insightful self-thinking. Whether the objects can be considered art or not is a question of interpretation, influenced by viewers own relationship to work. One idea was that if the work is done in such a way that the method or process of doing it does not immediately open up to the viewer, we are at the edge of art. Another idea was that a pinstripe pattern, for example, painted on a hot rod, is an addition to an existing object and as such it highlights the object itself, but is not an actual work of art. This leads, of course, to the idea that a pinstripe will only become art when it is painted on its own, for example on a canvas and placed on a wall. In my opinion, the purpose of a pinstripe painted on a vehicle is to support or emphasize the style of the vehicle, not to compete with it for spectacularity. My own belief is that new handicraft can become an art when the work has its own original interpretation and the quality of its work is sufficiently high. But in the end, it is the viewers who make the interpretation.

A Harley custom from Thailand was covered with Thai-themed messages in paint and sculpture. Is this art?

An interesting topic was also the relationship between mistakes in one's own work, whether they can happen, and whether they can be corrected. Here, too, the common perception was that mistakes are part of the job, and that without them there is no development; in fact, perhaps the greatest lessons are learned from mistakes! But of course, there are places where mistakes just can't happen, like a tattoing... However, detecting own mistakes requires a little distance to work. One interviewee stated that when working for the same job for a long time, he or she becomes blind and it is important to take short breaks, or even take photos of the work and view them through pictures. A photo is ruthless, it reveals things your brain can't do anymore!

Yokohama is remarkable for its high quality, whether it be vehicles, art or merchandise. Artists have had to pay a fee for their stand, which of course doesnt favour beginners. And the organizer is pretty strick to choose who have access to show at all. This year is the 30th anniversary of the Japanese pinstripe veteran Hiro Ishi, or Wildman, and in honor of this he had an extensive selection of pinstripe work on display. Wildman sought his education from Ed Roth in the US in the 1980s and carries the Roth heritage in his own style of painting. He is also an working for Mooneyes and is responsible for their t-shirts and many other graphic designs. It seemed that Wildman would never stop working! Makoto also mentined briefly tha he has 30 years of painting behind him this year. Makoto has developed pinstripe painting in a more Japanese style than Wildman.

Friendly competition among artists


There is clear competitive situation in the exhibition, every craftsman is there to sell his products. So it is important to find some sort of niché for your own products so that viewers will catch up with your presenting. It is significant that you plan how you display your pieces, because in narrow aisles, viewers often gaze down to the tables, objects that are too high may be overlooked. To get a status of a true celebrity, Shige Shuganuma, Mooneyes' director, explained that entering the Japanese market requires a lot of presence and repetition. One such star is Jellybean, an artist whose extraordinarily skilfully drawn female characters and posters are so astonishing, that they are instantly recognizable. Rockin' Jellybean is only showing in a wrestling mask, which adds to the character's exotics. You better queue up early for autographs, as they are only written at well-defined times!

Rockin' Jellybean is always wearing a mask in shows, here a lucky fan has had a chance to take a photo with the Master and his crew.
The Japanese seem to be fierce collectors, when the doors opened at 8am, a wild rush toward the Vans shoe stand began. The organizer has designed sneakers with their own logo and model, which were only available at the show. In front of the stand was a queue of more than one hundred meters, which snaked around the exhibition area, everyone wanted 120 € sneakers! The same thing happened on Mooneyes' own stand, with memorabilia and shirts made for the event. Makoto, for his part, makes a small series of Fortune Cat statues every year, which he has painted with almost superhuman skill. This year, there were nine of these twenty centimeters tall statues, and the first collectors had arrived at the door of the exhibition hall around nine o'clock the previous night. They were given a waiting number with which they could then choose their own. The € 800 statues were sold out in ten minutes!

Custom culture is a polyphonic, colorful and sometimes difficult to define. The Yokohama exhibition is an event that cannot be described without adjectives. The vibes of the kustom kulture experience is felt by all senses, and part of the experience only opens up with delay. A very big factor is the international community, whose members often share the same ideas, whether people from the South, North, East or West!






Max Grundy is famous for his fear-themed artwork







Italian Blaster is a well seasoned pinstriper who has also been working briefly with Ed Roth






Thursday, 14 November 2019

Rottarodi ja Sikalintta - Rat Rod and "Lobsider"



”Rat rod” eli” rottarodi” on pysynyt muodissa hämmästyttävästi koko 2000-luvun. Nimen alkuperästä on erilaisia näkemyksiä, mutta vahva arvaus on, että tyylillä viitataan ”rat bike” -eli rottapyörään. Sellaiselle tyypillistä on rähjäinen ulkonäkö ja erilaiset vippaskonstit, joilla pyörä pidetään liikenteessä. Yleensä tämä tapahtuu käyttäen varaosia jotka eivät ole alun perin kyseiseen moottoripyörämerkkiin, tai ylipäätään moottoripyörään tarkoitettuja. Väri on usein mattapintainen, koska sellaisen aikaansaaminen spraymaalilla on helpointa.

 Samalla tavoin rottarodin ulkonäölle on tyypillistä rähjäinen ulkonäkö, viimeistelemättömyys ja ruosteisuus, se on asenteeltaan agressiivinen ja epäsosiaalinen. Rottarodin lähtökohtana on usein 20 -40 -luvun auto, tosin alkuperäisestä ajoneuvosta on jäljellä usein lähinnä hahmo. Koria on usein muokattu vahvasti, katon korkeutta on laskettu, sisutus on repaleinen tai sen sijalla on lähinnä muutama selkänojallinen jakkara. Moottoria ei ole piilotettu konepellin alle, vaan se on julkeasti esillä ja rätisee täysin vaimentamattomien pakoputkiensa kautta, aiheuttaen kadulla vähintäänkin hämmennystä. Rottarodi näyttää myös varsin turvattomalta, verhoilematon sisustus repii kolaritilanteessa matkustajat viipaleiksi eikä jalankulkijoilla ei ole mitään mahdollisuutta selviytyä mahdollisessa yliajotilanteessa, toisin kuin pullamaisten nykyautojen kanssa.



Rottarodilla on suomalainen vastine, se on yhtä rajusti muokattu ajoneuvo mutta uudempaa, ehkäpä 50-70 -lukujen mallia. Epämääräisestä, vinosta tai takakenoisesta, jouset lintassa olevasta asennostaan autot saivat lempinimen ”lintta”, tai parhaimmillaan ”sikalintta”. Olennaista oli, että ajoneuvo oli keskivertokansalaista hämmentävä, sen rakentamista motivoi vahva hätkähdyttämisen tarve. Linttaan liittyy vahvasti yhteisöllisyys, saahan tilavaan, vaikkakin ehkä matalaan autoon mahtumaan mukaan paljon kavereita. Rottarodi tai lintta on siis asenneauto ja sellaisena sitä voi verrata vaikka rock-musiikkiin, tai ehkäpä pikemminkin punkiin. Molemmille on yhteistä vahva itse tekemisen ja itseilmaisun henki, epäilemättä myös hauskanpito, jossa ulkopuolisten kritiikillä ei ole mitään merkitystä. Toisaalta hyväksyvä nyökyttely oman porukan kesken arvostetaan korkealle.


Kuvat: Kimmo Lahtonen

Suomessa linttahenkisiä autoja ilmestyi cruisingeihin jo 80-luvulla.  Custom-ajattelua ilmensi se, että autojen piti olla matalia ja tähän päästiin sekä jousia katkaisemalla, että kattoa madaltamalla eli choppaamalla. Tärkeää oli, että ajoneuvolla pääsi matkaan, siksi ulkonäköön liittyvät muokkaukset eivät korostaneet sen kauneusarvoja, pikemminkin päinvastoin. Auton ulkonäköön suuresti vaikuttava renkaiden ja vanteiden tarkka valinta jäi toisarvoiseksi, riitti että alla olevat pyörät olivat pyöreät. Budjettihenkistä ajattelua korosti se, että auto oli yleensä neliovinen, parhaassa tapauksessa farmarimallinen ja tuntuu siltä, että vuosien 1961 – 64 -malliset Chevroletit olivat hyvin suosittuja.


Mattaväri nopeutti uuden sukupolven rakentajien pääsyä kadulle





Eräs ensimmäisiä rotta-autoja maassamme oli 80-luvun puolivälissä valmistunut Billy Laitilan Packard ”Junkyard-K”, joka ironisen nimensä mukaisesti oli romuttamo-kustom, osat haalittiin mistä löydettiin.  Packardin rakentaminen eroaa kuitenkin linttakulttuurista ratkaisevasti siinä mielessä, että tekijöillä oli selkeä käsitys klassisen kustom-auton mittasuhteista ja ilmeestä, puhumattakaan siitä, että he valitsivat autoon myös valkosivuiset renkaat custom-pölykapseleineen.  Packard oli maalattu mattaväriseksi, niin kuin useat sen jälkeen syntyneet lintta-autotkin. Mattavärisyys ei tuolloin välttämättä kuitenkaan ollut lopullinen tavoite, vaan välivaihe kohti lopullista viimeisteltyä pintaa.

Mattapintainen väri ei ollut sattumanvarainen valinta, sillä hot roddingin ja customrakentamisen historian tuntevat harrastajat tiesivät että jo 40-luvun rakentajat USA:ssa ajelivat autoilla joissa oli mattapintainen maali. Tämä johtui yleensä siitä, että autot olivat jokapäiväisessä käytössä ja rakentaja eteni työssään rahavarojensa mukaan, maalaus oli kallista ja siksi se sai odottaa pitkään. Suomessa historian tuntevia harrastajia oli 80-luvulla jo useita, eräs heistä oli Petri Hälvä joka 80-luvun ensi puoliskolla rakensi itselleen vuoden 1962 Pontiac Grand Prix- hardtopin. Hän valitsi autoonsa tarkoituksella mattapintaisen punertavan värin, kunnioittaen näin vanhaa perinnettä, siitä huolimatta että auto oli viimeistelty. Valintaa kummeksuttiin puritaanipiireissä, mutta kustomautoharrastajat peukuttivat sille vahvasti.

Kuva: Janne Lepola

1980-luvulla ajoneuvon rakentelussa tavoitteena oli aikaansaada viimeistelty ja ”kaunis” auto, tapahtumissa näki harvoin mattavärisiä, ”keskeneräisiä” ajoneuvoja. Kulunut alkuperäisväri saattoi koristaa ajoneuvoa, joka oli ”pelastettu”, eli elvytetty liikenteeseen pitkän seisonnan jäljiltä, mutta jonkinlainen kirjoittamaton tavoite oli saada sekin uudelleenmaalattua. Mattavärisyys antoikin nyt mahdollisuuden päästä nauttimaan ajamisesta, vaikka ajoneuvo oli vielä keskeneräinen. Keskeneräisyydestä tuli hyväksyttyä mattavärin kautta ja se osaltaan antoi 80-luvulla aikuisuuteen kasvaville, toisen sukupolven harrastajille, mahdollisuuden päästä liikenteeseen persoonallisella ajoneuvolla hiukan pienemmällä rahamäärällä. 

Aivan kuten punkia soitettiin amatööripohjalta, rakennettiin ajoneuvojakin itseopittujen tietojen ja vaatimattomien olosuhteiden puitteissa.


Rat Rod and "Lobsider"


The "rat rod" has remained amazingly fashionable throughout the 2000s. There are different views on the origin of the name, but a strong guess is that the style refers to the ”rat bike”. Typical of this is the rough appearance and the various sloppy mechanical solutions that keep the bike in traffic. Usually this is done by using spare parts which are not intended for the particular motorcycle brand in question or for a motorcycle in general. The paint job is often flat, as it is easiest to achieve with a spray can.

 Likewise, the appearance of the rat rod is characterized by its shoddy appearance, rust, aggressive and anti-social attitude. Rat rod is often based on a 20's-40's car, although the original parts are mostly replaced on something suitable. The bodywork is often heavily modified, the roof height has been lowered, the interior is ragged, or is replaced by shot seats. The engine is not hidden under the hood, but is prominently displayed and shakes through its open exhaust pipes, causing at least some confusion on the street. The rat rod also looks quite unsafe, with its unupholstered interior splitting passengers into slices in case of accident and pedestrians having no chance of coping with a possible collision, unlike rounded modern cars.

The rat rod has a Finnish counterpart, a drastically modified vehicle but a newer model, perhaps in the 50's and 70's. Because of their sideways or rearward -leaning body stance, the cars got the nickname "Lintta”, meaning roughly same as ”Lobsided”, or at the highest praise ”Beastly Lobsided”… The point was that the vehicle was confusing, and its construction was motivated by causing discomfort in the eyes of average people. There is a strong sense of community in the ”Lintta”, to get a lot of friends to fit in a spacious, albeit maybe a low car. So a rat rod as well as Lintta is an attitude car and as such can be compared to rock music, or perhaps to punk. They both share a strong spirit of self-expression, and no doubt fun, where criticism from outside is irrelevant. On the other hand, approving nods among your own crew is highly valued.

In Finland, low-cost Lintta’s appeared on cruising nights already in the early-to-to mid 80s. Custom thinking was reflected in the fact that the cars had to be low, and this was achieved by cutting the springs and lowering the roof. The important thing was that the vehicle was kept on the road, so the beauty related actions were not relevant, quite the contrary. The careful choice of tires and rims, that most influential of the appearance of the car, was of secondary importance, it was enough that the wheels were round. Budget thinking was emphasized by the fact that the car was usually a four-door, at best a station wagon, and it seems that the 1961-64 Chevrolets were very popular.

Flat paint helped to grow the popularity of customizing and getting the vehicles on the road


One of the first rat cars in our country was Billy Laitila’s Packard's 'Junkyard-K', which was completed in the mid-1980s, ironically known as the scrapyard-kustom. However, the construction of Packard differs radically from the Lintta-culture in the sense that the builders had a clear understanding of the proportions, stance and appearance of the classic kustom car. Not to mention the fact that the builders also chose whitewall tires with kustom hupcaps. Packard was painted in a flat color, as were many of the subsequent Lintta-rides. However, flat paint was not necessarily meant to be the final goal, but an intermediate step towards the final finished surface.

Flat paint was not a random choice, as hobbyists with understanding of history of hot rodding and kustom construction knew that as early as the 40s, builders in the US were driving cars with flat paint. This was usually due to the fact that the cars were in daily use and the builder proceeded with his financial resources, the painting was expensive and it was therefore a long wait. In the 1980s, there were already many enthusiasts in kustom history in Finland, one of whom was Petri Hälvä, who built the 1962 Pontiac Grand Prix hardtop in the first half of the 1980s. He deliberately chose a flat rust-reddish color for his car, thus respecting an old tradition even if the car was completely finished. The choice was bitterly received by puritanists, but it was strongly thumbed up by kustom car enthusiasts.

Indeed, in the 1980s, the goal of vehicle design was to produce a finished and "beautiful" car, and at the shows were rarely seen in flat painted, "unfinished" vehicles. A worn-out original color may have adorned a vehicle that had been "salvaged", that is, returned to road after a long standstill, but some sort of unwritten goal was to have it repainted. The flat paint now made it possible to enjoy driving even though the vehicle was still unfinished. The whole idea of using unfinished vehicle became accepted through the flat color. In the 1980s it actually contributed to the growth of second-generation Finnish car builders and enthuaists into a customized ride for slightly less money. 

Just as punk was played on an amateur basis, vehicles were built with self-taught knowledge and modest garages.

Pinstraipparin maailmaan tutustumassa - Getting to know the world of a pinstriper

Scroll down for Engish Text Photo: Matei Plesa Pinstripe-maalarin työ on itsenäistä mutta samalla vahvasti sidoksissa asiakkaa...